Table of Contents
Advertisement
FO-CC500A
FO-K01A
[3] Transmittable documents
1. Document Sizes
width
Normal size
length
(Max.)
A4 size
(Min.)
140mm
148mm
216mm
[Normal size]
Use document carrier sheet for smaller documents.
* With special sizes, only one sheet can be fed into the machine at a
time. Insert next page into feeder as current page is being scanned.
2. Paper Thickness & Weight
10 sheets
Paper weight
70 kg
21.5 lbs.
(80 g/m
Paper thickness (ref.) 0.1 mm
Paper size
LGL 8.5" x 14"(216 mm x 355.6 mm)
A4 8.27" x 11.7"(210 mm x 297 mm)
LTR 8.5" x 11"(216 mm x 279 mm)
Feeder capacity
A4/LTR: 10 sheets
LGL
3. Document Types
• Normal paper
Documents handwritten in pencil (No. 2 lead or softer), fountain pen,
ball-point pen, or felt-tipped pen can be transmitted.
Documents of normal contrast duplicated by a copying machine can
also be transmitted.
• Diazo copy (blue print)
Diazo copy documents of a normal contrast may be transmitted.
• Carbon copy
A carbon copy may be transmitted if its contrast is normal.
4. Cautions on Transmitting Documents
• Documents written in yellow, greenish yellow, or light blue ink cannot
be transmitted.
• Ink, glue, and correcting fluid on documents must be dry before the
documents can be transmitted.
• All clips, staples and pins must be removed from documents before
transmission.
• Patched (taped) documents should be copied first on a copier and
then the copies used for transmission.
• All documents should be fanned before insertion into the feeder to
prevent possible double feeds.
148 – 216 mm
140 – 297 mm
(Max.)
600mm
297mm
216mm
[Special size]
1sheet(Manual)
70 kg ~ 135 kg
14 lbs. ~ 42 lbs.
2
)
(52 g/m
2
~ 157g/m
0.1 mm ~ 0.18mm
: 1 sheet
5. Automatic Document Feeder Capacity
Number of pages that can be placed into the feeder at anytime is as
follows:
Normal size: max. ADF 10 pages
Special size: single sheet only (manual feed)
•
NOTES:
When you need to send or copy more pages than the feeder
limit, place additional pages in feeder when last page in
feeder is being scanned.
•
Place additional pages carefully and gently in feeder.
If force is used, double-feeding or a document jam may
result.
6. Readable Width & Length
The readable width and length of a document are slightly smaller than
the actual document size.
Note that characters or graphics outside the effective document scan-
ning range will not be read.
•
Readable width
210mm, max.
2
)
•
Readable length
This is the length of the document sent minus 5mm from the top and
bottom edges.
1 – 4
Readable width
5mm
Readable length
5mm
Advertisement
Chapters
Table of Contents
