Operation Panel - Sharp FO-CC500 Service Manual

FO-CC500A
FO-K01A

[2] Operation panel

Fax Machine
1
STOP COPY/HELP START/MEMORY
8 9
1. Display
This displays messages and prompts to help you operate the
machine.
2. INTERCOM key
Press this key to page or locate the cordless handset.
3. REC/MEMO key
Press this key to record an outgoing message, phone
conversation, or memo.
4. PLAY key
Press this key to play recorded messages.
5. Left and right arrow keys
Auto-dial numbers: When sending a fax or making a phone
call, press these keys to scroll through your auto-dial
numbers, the "REVIEW CALLS" list (only available if you
have Caller ID), and the last number dialed (redial).
FUNCTION key settings: Press the right arrow key after
scrolling with the up and down arrow keys to select a
FUNCTION key setting.
6. Number keys
Use these keys to dial numbers, and enter numbers and
letters when storing auto-dial numbers.
7. Panel release
Press this release to open the operation panel.
8. STOP key
Press this key to cancel operations before they are completed.
9. COPY/HELP key
When a document is in the feeder, press this key to make a
copy of a document. At any other time, press this key to print
out the Help List, a quick reference guide to the operation of
your fax machine.
10. START/MEMORY key
Press this key after dialing to begin fax transmission. Press
this key before dialing to send a fax through memory. The
key can also be pressed in the date and time display to show
the percentage of memory currently used.
11. RESOLUTION / RECEPTION MODE key
When a document is in the feeder, press this key to adjust
the resolution for faxing or copying. At any other time, press
this key to select the reception mode (an arrow in the display
will point to the currently selected reception mode).
12. FUNCTION key
Press this key to followed by the arrow keys to select special
functions and settings.
2 3
4
REC/
TEL FAX
PLAY
MEMO
TEL/FAX A.M.
INTERCOM
Z
REDIAL
RESOLUTION/
RECEPTION MODE
FUNCTION
12
10 11
5
A
SPEAKER
13 14
13. UP and DOWN arrow keys
Enlarge/Reduce setting: When marking a copy of a
document, press these keys to select an enlarge/reduce
setting.
Volume setting: When a document is not in the feeder,
press these keys to change the speaker volume when the
SPEAKER key has been pressed, or the ringer volume at
any other time.
FUNCTION key settings: Press these keys after pressing
the FUNCTION key to scroll through the FUNCTION MODE
settings.
14. SPEAKER key
Press this key to listen to the line and fax tones through the
speaker when faxing a document.
Note: This is not a speakerphone. You must pick up the
handset to talk with the other party.
15. REPEAT key
Press this key while listening to a message to play it again.
16. SKIP key
Press this key while listening to a message to skip to the next
message.
17. DELETE key
Press this key to erase recorded messages.
Monitoring phone conversations
When speaking through the handset, you can press
allow a third person to listen to the conversation through the
speaker.
(To turn off the speaker, press
To adjust the volume of the speaker when monitoring a
conversation, press
lowest setting each time the handset is replaced).
Note that the speaker cannot be used for speaking; it is
only for listening.
To avoid feedback (a loud howling sound), be sure to turn off
SPEAKER
the speaker (press
handset.
1 – 2
6
ABC DEF
1 2 3
GHI JKL MNO
4 5 6
PQRS TUV WXYZ
7 8 9
0
DELETE
REPEAT SKIP
15 16 17
SPEAKER
SPEAKER
again.)
or (the volume reverts to the
once again) before you replace the
7
to