Hirschmann RS20 Programming Manual page 19

Link Aggregation 2.2 HIPER-Ring and link aggregation
Note: If you want to use a link aggregation in a HIPER-Ring, you first
configure the link aggregation, then the HIPER-Ring. In the HIPER-Ring
dialog, you enter the index of the desired link aggregation as the value for the
module and the port. Make sure that the respective Ring port belongs to the
selected link aggregation.
Note: Deactivate RSTP when link aggregations are segments of a HIPER-
Ring.
Redundanz L2P
19
Release 5.0 04/09