Hirschmann RS20 Programming Manual page 16

Link Aggregation
Figure 5: Assigning ports to link aggregation
enable
configure
link-aggregation LATP
New link aggregation created. Slot/port is 8.1.
Interface 1/1
addport 8/1
Interface 1/2
addport 8/1
Interface 1/3
addport 8/1
exit
show link-aggregation brief
Max. num. of LAGs: 7
Slot no. for LAGs: 8
Static Capability: Disabled
Logical Link-Aggr.
Interface Name
---------- ---------- ------------ --------- -------------------
8/1 LATP
16
2.1 Example of link aggregation
Switch to the Privileged EXEC mode.
Switch to the Configuration mode.
Create a new link aggregation with the name
LATP.
Configuration for port 1.1
Assign port 1.1 to link aggregation 8.1.
Configuration for port 1.2
Assign port 1.2 to link aggregation 8.1.
Configuration for port 1.3
Assign port 1.3 to link aggregation 8.1.
Switch to the privileged EXEC mode.
Show the parameters of all the link aggregations
created on the device.
Link State Mbr Ports Active Ports
Down 1/1,1/2, 1/3
Redundanz L2P
Release 5.0 04/09