For Using Api-Gplv(W32) - Contec GPIB-F-LPE User Manual

For using API-GPLV(W32)

Select API-GPLV(W32)
(1) The following dialog box appears to select "Driver Type" and "Install Type".
(2) Select "GPIB for LabVIEW API-GPLV(W32)".
(3) Select "Driver, Help, etc..(Full Install)".
(4) Click on the [Install] button.
Executing the Installation
(1) Follow the on-screen instructions to proceed to install.
(2) The driver installation is completed when the GPIB setup utility is started.
If you are installing the software and hardware for the first time, click on the [Cancel] button in this
step to terminate the installation procedure.
* When the hardware has already been installed:
Go to "For Using API-GPLV(W32)" in Step 4 "Initializing the Software".
GPIB-F-LPE, GPIB-FL-LPE
2. Setup
15