Samsung VP-D361i Service Manual page 39

4-2-5 Sub Chassis
Note 1 : When disassembling, take care not to damage
any part. Do not stain the Rollers and Poles with oil or
grease.
Note 2 : Always remove the Sub Chassis Ass'y when
the Deck Ass'y is in unload mode.
4-2-5(a) Disassembly
1) Release Sub FPC.
2) Remove 2 Screws Œ.
3) Lift up Sub Chassis Ass'y ´ from Main Chassis ˇ.
2 SCREWS Œ
SUB CHASSIS ASS'Y ´
MAIN CHASSIS ASS'Y ˇ
Samsung Electronics
4-2-5(b) Reassembly
1) Insert PinPart ¨ of Sub Chassis Ass'y ´ to Main
2) Secure 2 Screws Œ.
Note 1 : After assembling ´ with ˇ make sure that
Sub Chassis Ass'y ´ loads and unloads correctly by
applying 3V~5V to the Motor Loading.
Note 2 : When reassembling, confirm that pin of Arm
Review insert into the Guide Cam.
Ø SECURE HOLE
Fig. 4-11 Sub Chassis
Chassis Rail ˆ, and then fit the reassembly part of
two place to Secure Hole Ø of Main Chassis Ass'y
ˇ.
¨ PIN
ˆ MAIN CHASSIS RAIL
Disassembly and Reassembly
4-11