Samsung VP-D361i Service Manual page 177

ENGLISH
USB Interface (VP-D362(i)/D363(i)/D364W(i)/D365W(i) only)
Using the USB Streaming Function
✤ This function works in both <Camera> and <Player> modes. ➥page 19
✤ To use USB streaming, the DV Driver, Video Codec and DirectX 9.0. programs must be installed in the PC.
✤ You can view Camcorder video on your PC using USB streaming.
✤ You can also store it as a moving image in the "avi" file format, or as a photo image in the "jpg" file format on a PC.
1. Set the [Power] switch to [CAMERA] or [PLAYER], set the [MODE] switch to [TAPE] (VP-D363(i)/D364W(i)/D365W(i)
only).
2. Connect one end of the USB cable to the USB jack on the Camcorder and the other end to the USB jack on your
computer.
3. Setup and execute Windows Movie Maker or the Ulead VIDEO Studio Software application provided on the CD.
■ For detailed instructions for Ulead VIDEO Studio use, refer to the program's Help function.
Windows Movie Maker is used for WINDOWS ME and XP users. (C:/program files/Movie maker/moviemk.exe)
■
Using the removable Disk Function (VP-D363(i)/D364W(i)/D365W(i) only)
✤ You can easily transfer data from a Memory Card to a PC without additional cards via a USB connection.
1. Set the [Power] switch to [CAMERA] or [PLAYER], set the [Mode] switch to [MEMORY].
2. Connect one end of the USB cable to the USB jack on the Camcorder and the other end to the USB jack on your
computer.
3. To verify whether the removable disk has been properly recognised, open Windows Explorer and locate the removable
disk.
94 94
Maintenance
After Finishing a Recording
✤ At the end of a recording you must remove the power source.
✤ When recording with a Battery Pack, leaving the pack on the Camcorder can reduce the life
span of the battery.
The Battery Pack should be release after recording is completed.
1. Open the Casstte door while sliding the [TAPE EJECT] switch in the direction or the arrow.
■ Pull the cassette compartment out automatically.
■ Please wait while the tape is completely ejected.
2. After removing the tape, close the door and store the Camcorder in a dust free environment.
Dust and other foreign materials can cause square-shaped noise or jerky images.
3. Set the [Power] switch to the [Off].
4. Disconnect the power source or remove the Battery Pack.
Press the [BATTERY RELEASE] button located on the bottom of the Camcorder and slide the
Battery Pack in the direction of the arrow.
Usable Cassette Tapes
When you have recorded something that you wish to keep, you can protect it so that it will not be
accidentally erased.
a. Protecting a tape: Push the safety tab on the cassette so that the hole is uncovered.
b. Removing the tape protection:
If you no longer wish to keep the recording on the cassette, push the safety tab back so that
it covers the hole.
How to store a tape
a. Avoid places with magnets or magnetic interference.
b. Avoid humidity and dust prone places.
c. Keep the tape in an upright position and avoid storing it in direct sunlight.
d. Avoid dropping or knocking your tapes.
Samsung Electronics
Operating Instructions
ENGLISH
1
3
a
SAVE
b
REC
95 95
11-17