Download  Print this page

Recording With A Dv Connection Cable; Transferring A Digital Image Through A Usb Connection; Usb Connection Speed Depending On The System; System Requirements - Samsung VP-D361i Service Manual

Hide thumbs

Advertisement

Operating Instructions
ENGLISH
IEEE 1394 Data Transfer

Recording with a DV Connection Cable

1. Set the [Power] switch to [PLAYER].
2. Set the [Mode] switch to [TAPE]. (VP-D363(i)/D364W(i)/D365W(i)
only)
3. Connect the DV cable (not supplied) from the DV jack of the
Camcorder to the DV jack of the other DV device.
Make sure that
4. Press the [Start/Stop] button to begin REC PAUSE mode.
<PAUSE> is displayed.
5. Start playback on the other DV device while you monitor the picture.
6. Press the [Start/Stop] button to start recording.
If you want to pause recording momentarily, press the
[Start/Stop] button again.
7. To stop recording, press the [■ (STOP)] button.
[ Notes ]
When you transmit data from the Camcorder to another DV device, some functions may not work.
If this occurs, please reconnect the DV cable or turn the power OFF and ON again.
When you transmit data from the Camcorder to PC, PC function button is not available in <M.Player> mode.
Do not use other DV device when using IEEE1394.
Do not connect the Camcorder to a PC using both DV and USB cables. It may not operate properly.
The IEEE1394 cable (DV cable)is sold separately.
Moving image software is commercially available.
Most DV enabled PCs have a 6 pin jack. In this case, a 6pin/4pin cable is required for the connection.
Most DV enabled Notebooks and Laptops have a 4 pin socket. Use a 4pin/4pin cable for the connection.
DIS and COLOR NITE are not available when in DV (IEEE1394) mode.
If DV (IEEE1394) mode is set, DIS and COLOR NITE modes will be released.
When using this Camcorder as a recorder, the pictures that appear on a monitor may seem uneven,
however recorded pictures will not be affected.
88
88
USB Interface (VP-D362(i)/D363(i)/D364W(i)/D365W(i) only)
Using USB Interface (VP-D362(i)/D363(i)/D364W(i)/D365W(i) only)

Transferring a Digital Image through a USB Connection

✤ The Camcorder supports both USB 1.1 and 2.0 standards. (Depends on the PC specification)
✤ You can transfer a recorded file in Memory Card to a PC via a USB connection. (VP-D363(i)/D364W(i)/D365W(i) only)
✤ If you transfer data to a PC, you need to install the software (DV Driver, Video Codec, DirectX 9.0) supplied with the Camcorder.

USB Connection Speed depending on the System

High speed USB connection is supported by Microsoft (Windows) device drivers only.
Windows 98SE/ME - Full Speed USB
Windows 2000 - High speed USB on a system with Service Pack 4 or later installed.
Windows XP - High speed USB on a system with Service Pack 1 or later installed.

System Requirements

CPU
OS(Operating System)
Memory
HDD capacity
Resolution
USB
It is not available for Macintosh systems.
[ Notes ]
USB 2.0 works for removable disk and USB streaming functions.
On a slower PC than recommended, movie playback may not be smooth or video editing may take a long time.
On a slower PC than recommended, movie playback may skip frames or operate unexpectedly.
Intel
®
Pentium III™ or Pentium 4™ is a trademark of the Intel Corporation.
Windows
®
All other brands and names are property of their respective owners.
Operations are not guaranteed for all of the recommended computer environments mentioned above.
Do not connect the Camcorder to a PC using both DV and USB cables. It may not operate properly.
In <M.Cam> or <M.Player> mode, be sure that the Memory Card is inserted into Camcorder before connecting USB cable. If no Memory Card or an
unformatted Memory Card is inserted, PC will not recognize your Camcorder as a removable disk. (VP-D363(i)/D364W(i)/D365W(i) only)
USB Streaming requires Video Codec, DV Driver and DirectX 9.0.
If you disconnect the USB cable from the PC or the Camcorder during the data transfer, the data transfer will stop and the data may be damaged.
If you connect the USB cable to a PC using a USB HUB or with other devices at the same time, it may cause conflict and may not work properly.
If this occurs, remove all other USB devices and try the connection again.
11-14
is displayed.
Windows System
Minimum
Intel
®
Pentium III™, 600MHz
®
Windows
98SE/ME
128MB
1GB or more
1024 x 768 dots 24bit Colour
USB1.1
is a registered trademark of the Microsoft
®
Corporation.
Recommended
Intel
®
Pentium 4™ , 2GHz
®
Windows
2000/XP
512MB
2GB or more
1024 x 768 dots 24bit Colour
USB2.0 High Speed
Q UI
M EN
CK
U
ENGLISH
89
89
Samsung Electronics

Advertisement

Table of Contents

   Related Manuals for Samsung VP-D361i

Comments to this Manuals

Symbols: 0
Latest comments: