Samsung VP-D361i Service Manual page 176

Operating Instructions
ENGLISH
USB Interface (VP-D362(i)/D363(i)/D364W(i)/D365W(i) only)
Connecting to a PC
1. Connect a USB cable to the USB jack on the PC.
If a USB cable is connected to the Camcorder's USB jack, the Multi
■
Cable is disabled.
2. Connect the other end of the USB cable into the USB jack on the
Camcorder. (USB jack)
If PC is connected with the USB to the Camcorder, only the [Power]
■
switch, [Mode] switch, [Zoom] lever can be operated.
Disconnecting the USB Cable
✤ After completing the data transmission, you must disconnect the cable in
the following way:
1. Select the removable disc icon and click the right mouse button to select <Eject>.
2. Select <Confirm> and disconnect the USB cable when the Windows Splash screen appears.
[ Notes ]
If you disconnect the USB cable from the PC or the Camcorder while transferring, the data transmission will stop and
■
the data may be damaged.
If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other USB
■
devices, the Camcorder may not work properly. If this occurs, remove all USB devices from the PC and reconnect the
Camcorder.
92 92
USB Interface (VP-D362(i)/D363(i)/D364W(i)/D365W(i) only)
Using the PC Camera Function
✤ This function works only in <Camera> mode. ➥page 19
✤ To use the PC Camera function, DV Driver, Video Codec and DirectX 9.0 programs must be installed in the PC.
✤ You can use this Camcorder as a PC Camera.
✤ When you connect to a Web site that provides video chatting functions, you can use your Camcorder for such
functions.
✤ When using this camcorder for video conferencing (such as Net Meeting), voice communication may not be supported
depending on the video conferencing software. In this case, connect an external microphone to the soundcard of the
PC to enable voice communication.
✤ Using the Camcorder with PC Net Meeting program installed, you can participate in video conference.
✤ The PC Camera's screen size (Transferred video frame rate for the PC Camera function is max 12.5 fps.)
- 640X480 (VGA) pixels for USB 2.0 connection.
✤ If PC is connected with the USB to the Camcorder, only the [Power] switch, [Mode] switch, [Zoom] lever can be
operated.
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [TAPE]. (VP-D363(i)/D364W(i)/D365W(i) only)
3. Connect one end of the USB cable to the USB jack on the Camcorder and the other end
to the USB connector on your computer.
11-16
QU
ME IC K
NU
ENGLISH
1
2
93 93
Samsung Electronics