Samsung VP-D361i Service Manual page 171

Initial Setting : Display Menu Setting
Adjusting the LCD Screen (LCD Bright/ LCD Colour)
✤ Adjusting the LCD Screen works in <Camera>/<Player>/<M.Cam>/<M.Player> modes. ➥page 19
✤ Your Camcorder is equipped with a 2.5 inch (VP-D361(i)/D362(i)/D363(i)) / 2.7 inch wide (VP-D361W(i)/D364W(i)
/D365W(i)) colour Liquid Crystal Display (LCD) Screen, which enables you to view what you are recording or playing
back directly.
✤ Depending on the conditions under which you are using the Camcorder (indoors or outdoors for example), you can
adjust;
- <LCD Bright>
- <LCD Colour>
1. Set the [Power] switch to [CAMERA] or [PLAYER].
2. Set the [Mode] switch to [TAPE] or [MEMORY]. (VP-D363(i)/D364W(i)/D365W(i) only)
3. Press the [MENU] button.
■ The menu list will appear.
4. Move the [Zoom] lever up or down to select <Display>, then press the [OK] button.
5. Move the [Zoom] lever up or down to select the item you want to adjust (LCD Bright or
LCD Colour), then press the [OK] button.
6. Move the [Zoom] lever up or down to adjust the value of the selected item
(LCD Bright or LCD Colour), then press the [OK] button.
■ You can set values for <LCD Bright> and <LCD Colour> between <0> ~ <35>.
7. To exit, press the [MENU] button.
■ Adjusting the LCD Screen does not affect the brightness and colour of the image to
be recorded.
ENGLISH
Initial Setting : Display Menu Setting
Displaying the Date/Time (Date/Time)
✤ The Date/Time function works in <Camera>/<Player>/<M.Cam>/<M.Player> modes. ➥page 19
✤ The date and time are automatically recorded on a special data area of the tape.
1. Set the [Power] switch to [CAMERA] or [PLAYER].
2. Set the [Mode] switch to [TAPE] or [MEMORY]. (VP-D363(i)/D364W(i)/D365W(i) only)
3. Press the [MENU] button.
■ The menu list will appear.
4. Move the [Zoom] lever up or down to select <Display>, then press the [OK] button.
5. Move the [Zoom] lever up or down to select <Date/Time>, then press the [OK]
button.
6. Move the [Zoom] lever up or down to select the display type of the Date/Time, then press
the [OK] button.
■
Display type of the Date/Time: <Off>, <Date>, <Time>, <Date&Time>.
7. To exit, press the [MENU] button.
[ Notes ]
■ The Date/Time will read <00:00 1.JAN.2006> in the following conditions.
- During playback of a blank section of a tape.
- If the tape was recorded before setting the <Date/Time> in the Camcorder.
- When the Lithium Battery becomes weak or dead.
Before you use the <Date/Time> function, you must set the clock. ➥page 23
■
30 30
Samsung Electronics
Operating Instructions
ENGLISH
Q U
IC K
1
M E
N U
4
Camera Mode
√Display
LCD Bright
LCD Colour
√Off
Date/Time
√On
TV Display
ZOOM Move OK Select MENU Exit
6
Camera Mode
Back
LCD Bright [18]
LCD Colour
Date/Time
TV Display
ZOOM Adjust OK Select MENU Exit
29 29
1
4
Camera Mode
√Display
LCD Bright
LCD Colour
Date/Time √Off
TV Display √On
ZOOM Move OK Select MENU Exit
6
Camera Mode
Back
LCD Bright
LCD Colour
Date/Time
Off
TV Display
Date
Time
Date&Time
ZOOM Move OK Select MENU Exit
11-11