Samsung VP-D361i Service Manual page 44

Disassembly and Reassembly
4-2-10 Motor Capstan, Arm Pinch roller, Slide main, Lever Eject
4-2-10(a) Disassembly
Note 1 : When removing and reassembling, be careful
not to giss the Gear Part.
Note 2 : When removing and reassembling, be careful
not to touch the hand in the pinch Roller. (Protection
contamination)
1) Remove the 2 Screws Πand lift up the Motor
Capstan ´.
2) Eliminate the Washer Slit ˇ and separate Spring
Lever Pinch ¨ from the Hook of Main Chassis ˆ.
3) Lift up the Arm Pinch Roller Ø.
5) Lift up the Slide Main ∏.
6) Lift up the Lever Eject ".
2 SCREWS ´
SLIDE MAIN ∏
MAIN CHASSIS
4-16
Fig. 4-15 Motor Capstan, Arm Pinch Roller, Slide Main, LeverEject
4-2-10(b) Reassembly
1) Assemble the Lever Eject ".
2) Assemble the Slide Main ∏.
3) After assemble Arm Pinch Roller Ø to Main
Chassis, and then hang the Spring Lever Pinch ¨ to
Hook of Main Chassis ˆ. (Reference : Detail Part)
4) Secure the Washer Slit ˇ.
5) Assemble the Motor Capstan ´ and secure the
2 Screws Œ.
´ MOTOR CAPSTAN
2
ˇ WASHER SLIT
Ø ARM PINCH ROLLER
¨ SPRING LEVER PINCH
" LEVER EJECT
ˆ MAIN CHASSIS HOOK
Samsung Electronics