Table of Contents
Advertisement
Performing Advanced Configuration
•
Authentication Mode: 802.1x
•
Cipher: WEP
•
Encryption Key Length: 64 or 128 Bits.
•
If 802.1x is enabled simultaneously with WEP, the 802.1x Station's encryption key length is determined by
the WEP encryption key.
•
WPA Station:
•
Authentication Mode: 802.1x
•
Cipher: TKIP
•
WPA-PSK Station:
•
Authentication Mode: PSK
•
Cipher: TKIP
•
PSK Passphrase: an 8-63 character user-defined phrase. It is recommended a passphrase of at least 13
characters, including both letters and numbers, and upper and lower case characters to ensure that the
generated key cannot be easily deciphered by network infiltrators.
•
802.11i Station:
•
Authentication Mode: 802.1x
•
Cipher: AES
•
802.11i-PSK Station:
•
Authentication Mode: PSK
•
Cipher: AES
•
PSK Passphrase: an 8-63 character user-defined phrase. It is recommended a passphrase of at least 13
characters, including both letters and numbers, and upper and lower case characters to ensure that the
generated key cannot be easily deciphered by network infiltrators.
5. When finished configuring all parameters, click OK.
6. If you selected a Security Mode of 802.1x Station, WPA Station, or 802.11i Station, you must configure a RADIUS
802.1x/EAP server. Refer to the
Security Profile 1 will be used by default for all wireless interfaces.
7. Refer to the following section for advanced VLAN configuration options:
VLAN Protocol Disabled
8. Reboot the AP.
Configuring RADIUS Profiles
and
Adding or Modifying an SSID/VLAN with VLAN Protocol
section.
Adding or Modifying an SSID/VLAN with
Enabled.
96
Advertisement
Table of Contents
