Performing Advanced Configuration
Figure 4-4
Link Integrity Configuration Screen
Interfaces
The Interfaces tab contains the following sub-tabs:
–
Operational Mode
–
8Wireless-A and Wireless-B
–
Ethernet
From these sub-tabs, you configure the Access Point's operational mode, wireless interface settings and Ethernet
settings. You may also configure a
For the wireless interface configuration, refer to the wireless parameters below that correspond to your radio type.
–
Wireless A (802.11a)
–
Wireless (802.11b)
–
Wireless (802.11b/g)
–
Wireless (802.11a/g)
Wireless Distribution System (WDS)
for AP-to-AP communications.
42