Table of Contents
Advertisement
Getting Started
The AP has been certified under UL Standard 2043 and can be installed in the plenum only when the following
conditions apply:
•
The unit uses Active Ethernet (AE) to receive power over a plenum-rated Category 5 Ethernet cable (the
power cable must not be connected to the unit).
•
The unit's plastic covers have been removed (this includes the cable cover, the front cover, and the back
cover).
Kensington Security Slot
The AP enclosure includes a Kensington Security Slot for use with a Kensington locking mechanism. When properly
installed, a Kensington lock can prevent unauthorized personnel from stealing the AP. In addition, the Kensington locks
secures the cable cover in place, which prevents tampering with the Ethernet and power cables.
The Kensington Security Slot is shown in the illustrations below (the figure on the left shows the slot with the cable
cover attached; the figure on the right shows the slot with the cable cover removed). See
for information on Kensington security solutions.
Figure 2-15 Kensington Security Slot
http://www.kensington.com
32
Advertisement
Table of Contents
