Table of Contents
Advertisement
Performing Advanced Configuration
Figure 4-32 SSID/VLAN Edit Entries Screen (VLAN Protocol Disabled)
4. Enter a unique Network Name (SSID), between 1 and 32 characters. This parameter is mandatory.
5. Enter a unique VLAN ID. This parameter is mandatory.
–
You must specify a unique VLAN ID for each SSID on the interface. A VLAN ID is a number from -1 to 4094. A
value of -1 means that an entry is "untagged."
–
You can set the VLAN ID to "-1" or "untagged" if you do not want clients that are using a specific SSID to be
members of a VLAN workgroup. Only one "untagged" VLAN ID is allowed per interface.
–
The VLAN ID must match an ID used by your network; contact your network administrator if you need
assistance defining the VLAN IDs.
6. If editing an entry, enable or disable the VLAN using the Status drop-down menu. If adding an entry, this field will
not appear.
7. Click OK to return to Wireless Security Configuration Screen. See
Figure 4-31 on page
95.
99
Advertisement
Table of Contents
