Table of Contents
Advertisement
Performing Advanced Configuration
2. Write down the MAC Address of the radio that you wish to include in the Wireless Distribution System.
3. Click on Interfaces > Wireless.
4. Scroll down to the Wireless Distribution System heading.
5. Click the Edit button to update the Wireless Distribution System (WDS) Table (see
Figure
4-8).
Figure 4-10 WDS Edit Entry Screen
The WDS Configuration screen will be displayed (see
Figure
4-9).
Figure 4-11
WDS Configuration Screen
6. If desired, enable security by checking the Enable WDS Security Mode box.
7. If security mode is enabled, enter a value for Encryption Key 0.
55
Advertisement
Table of Contents
