Product Overview
provides one reference input signal, one HD/SD-SDI output
Support selecting control mode between manual control and automatic
control
The automatic mode performs based on signal analysis of video loss,
EDH, freeze frame, black burst and audio supervision.
Build-in automatic horizontal corrector, and adjustable delay
Detecting the trigger of alarm criteria for the control mode switch-over
Support controls through remote control panel, GPIO and RS422
Input IN1 bypass to the output in the event of power failure or module
missing
The input cable equalization automatically
Support clean switching technology
Configures the modules through switches or network control panel
Functionality
Alarms when video lost, static frame or detecting black field
Supports power off memory, the settings will be restored if the module
loses power
Provides frame synchronizer
Supports intelligent protection function in order to avoiding "misuse".
When the input signal is detected abnormal, the switching operation for
output would be invalid.
Product Module
Table 1-1 Input/Output Signals Supported by ACOHD6800
Module Type
ACOHD6800
Signal Flow Chart
The signal flow chart for this unit is shown as in Figure 1-2:
Figure 1-2 The Signal Flow Chart of ACOHD6800
Input
four HD/SD-SDI video input
one REF input
Output
one HD-SDI loop output with
clock recovery
2