Operation and Control
5.4 Network Control
Install the ACOHD6800 module into a 6800N series frame, and it must be
cooperate with 6800-FC module which provides network control function in the
frame, thus, you can configure and upgrade the ACOHD6800 module by
network.
Use a browser to enter into a web control page for ACOHD6800 settings.
For example, use Internet Explorer to enter into a web control page. Input
http://192.168.1.138
network control page as shown in Figure 5-6:
Figure 5-6 The Network Control Interface of ACOHD6800 Module
Options
Click the device list at the left side of the page, selecting ACOHD6800 (4
×1), then, click Options tab at the top of the page to set the menu items
used in ACOHD6800, as shown in Figure 5-7, the parameters are as the
same as in Table 5-1, Table 5-2.
in address bar, then, press Enter key, it will display the
28