Table of Contents
Advertisement
Then, switch SW1 to a menu parameter item (1~F) of the option you
want to set, and toggle SW2 to select and set the value of the chosen
parameter item.
The position 0 of every Bank is always used to select Bank, that is,
whichever Bank it is, as long as you switch SW1 to position 0, toggle SW2
to select a Bank.
5.2.2 Menu Items
You can set the control mode, switch intervals, alarm levels, alarm
parameters etc. by using the menu items.
The functions and value range of each Bank menu items are as shown in
Table 5-1, Table 5-2.
You can use the combination expression of the bank position and the SW1
position listed in a pair of square brackets to represent a parameter item.
For example [0, 1], it represents selecting BANK0 and then rotate SW1 to
1 position for Control Mode selection. The other items are as below.
Table 5-1 SW1 Function Settings of Bank 0
SW1
Function
Position
0
Bank Select
1
Control Mode
2
Auto Period
3
Auto Switch Mode
4
Signal Loss Detection
Signal
5
Levels
6
EDH Detection
Value(Setting by SW2)
Bank0, Bank1
0:manual
1:auto
0~255(second)
00: mode 1, switch to
01: mode 2, switch to
10: mode 1, switch back
11: mode 2, switch back
0: disable
1: enable
Loss
Alarm
15: switch (level 1)
0: alarm (level 2)
0: disable
1: enable
19
Operation and Control
Default
Bank 0
1
0
mode
1,switch
to
1
15
1
Advertisement
Table of Contents
