Table of Contents
Advertisement
Step 5 Install the front panel.
At last, install the front panel of the frame, as shown in Figure 3-6.
Figure 3-6 Front Panel-Install the Front Panle
Uninstallation
Follow the following steps to remove the module:
Step 1 Remove the front panel of the frame.
Step 6 Loosen and take off the module
Press down the extractor handle to loosen the module, as shown in
Figure 3-7.
Figure 3-7 Press Down the Extractor Handle
Then, hold the swivel handle, and pull out the module along the slot
of the frame.
Step 7 Install the front panel.
Take off the module, and mount the front panel on the frame.
Step 8 Take off the rear connector
Unscrew the screws of the rear connector, and take off the rear
connector.
Unpack and Installation
9
Advertisement
Table of Contents
