Table of Contents
Advertisement
Chapter 5 Operation and Control
This chapter describes the main functionality and working mode of
ACOHD6800.
5.1 Instructions on Control and Operation
The control switches are at the edge of the module, as shown in Figure 5-1:
Figure 5-1 The Position of Control Switches
The function and usage of the switch are as follows:
SW1: It is a rotary switch which has 16 positions coded from 0 to F, it is
1.
used to select and point to a parameter item. The selection range is: 0, 1,
2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F.
Figure 5-2 Rotary Switch Pointing at 0
For example: as shown in Figure 5-2, the pointer is pointing at the position
0, that is Bank Select as shown in Table 5-1.
8
0
0
17
Operation and Control
Advertisement
Table of Contents
