Operation and Control
Figure 5-7 The Options Page of ACOHD6800 Module
For Example:
Define the alarm level for the alarm criteria, and take the definition of
"EDH Detection Alarm Levels" for example.
Click the "EDH Detection Alarm Levels" selection frame in the red
rectangle as shown in Figure 5-8, it will show the drop list for parameter
items, select "alarm" for it, and click Refresh button to save the
modification, then it will just alarm but not switchover when detecting the
EDH error. The other alarm levels definition frames are labels in green
rectangle as shown in Figure 5-8.
Figure 5-8 Definition of Alarm Level
29