Dimensions, Performance And Consumption; Mechanical Safety Characteristics, Hazards; Transport, Handling And Storage; Introduction - Electrolux Prostore PS06R1F User Manual

A.2.3 Dimensions, performance and consumption
600 mm models
External dimensions:
width mm
depth mm
height mm
Compartment dimensions:
width mm
depth mm
height mm
Rack dimensions mm
Power supply voltage V
Power supply voltage V
("Marine" refrigerated models)
Power supply voltage V
Gross capacity L
Equivalent sound pressure
level Leq (*) dB(A)
(*) The value could increase depending on the workplace
where measured.
900 mm models
External dimensions:
width mm
depth mm
height mm
Compartment dimensions:
width mm
depth mm
height mm
model R290 height mm
Rack dimensions mm
Power supply voltage V
Power supply voltage V
("Marine" refrigerated models)
Power supply voltage V
Gross capacity L
Equivalent sound pressure
level Leq (*) dB(A)
(*) The value could increase depending on the workplace
where measured.
Refrigerated models with fully insulated door and glass
door
Temp. range in compartment °C
Freezer models with fully insulated door
Temp. range in compartment °C
Refrigerated models with separate compartments
Temp. range in compartment °C
Refrigerated/freezer models with separate compartments
Temp. range in compart-
ment °C
"Ice-cream preserver" models
Temp. range in compartment °C
"Marine" refrigerated models
Temp. range in compartment °C
"Marine" freezer models
Temp. range in compartment °C
600
700
2040
472
582
1474
520x442
230/50 (Standard models)
220/60
220/50-60
("Marine" freezer models)
470
<70
900
700
2040
772
582
1471
1436
700x530
230/50 (Standard models)
220/60
220/50-60
("Marine" freezer models)
720
<70
0/+10
-15/-22
0/+10 0/+10
0/+10 -15/-22
-12/-28
0/+10
-15/-22
A.2.4 Mechanical safety characteristics, hazards
The appliance does not have sharp edges or protruding parts.
The guards for the moving and live parts are xed to the cab-
inet with screws, to prevent accidental access.
B.1 Transport, handling and storage
B.1.1 Introduction
Transport (i.e. transfer of the machine from one place to anoth-
er) and handling (i.e. transfer inside workplaces) must occur
with the use of special and adequate means.
ATTENTION
Due to their size, the ma-
chines cannot be stacked
on top of each other during
transport, handling and
storage; this eliminates any
risks of loads tipping over
due to stacking.
NOTE
Quali ed personnel must:
have speci c technical training and experience in
` `
the use of lifting systems;
have knowledge of the safety regulations and ap-
` `
plicable laws in the relevant sector;
have knowledge of the general safety rules;
` `
ensure the use of personal protection equipment
` `
suitable for the type of operation carried out;
be able to recognise and avoid any possible hazard.
` `
B.1.2 Transport: instructions for the carrier
ATTENTION
Do not stand under sus-
pended loads during load-
ing/unloading operations.
Unauthorised personnel
must not enter the work
area.
The weight of the appliance
alone is not su cient to
keep it steady.
69