Reasonably Foreseeable Improper Use; Residual Risks - Electrolux Prostore PS06R1F User Manual

C.2.6 Reasonably foreseeable improper use
Improper use is any use di erent from that speci ed in this
manual. During machine operation, other types of work or
activities deemed improper and that in general can involve
risks for the safety of operators and damage to the appliance
are not allowed.
Reasonably foreseeable improper use includes:
lack of machine maintenance, cleaning and periodical
` `
checks;
structural changes or modi cations to the operating logic;
` `
tampering with the guards or safety devices;
` `
failure to use personal protection equipment by opera-
` `
tors, specialised technicians and maintenance personnel;
failure to use suitable accessories (e.g. use of unsuitable
` `
equipment or ladders);
keeping combustible or ammable materials, or in any
` `
case materials not compatible with or pertinent to the
work, near the machine;
wrong machine installation;
` `
placing in the machine any objects or things not com-
` `
patible with refrigeration, freezing or preservation, or
that can damage the machine, cause injury or pollute
the environment;
climbing on the machine;
` `
non-compliance with the requirements for correct ma-
` `
chine use;
other actions that give rise to risks not eliminable by the
` `
Manufacturer.
ATTENTION
The previously described
actions are prohibited!
86
C.2.7 Residual risks
The machine has several risks that were not completely elim-
inated from a design standpoint or with the installation of
adequate protection devices.
Nevertheless, through this manual the Manufacturer has taken
steps to inform operators of such risks, carefully indicating the
personal protection equipment to be used by them.
Su cient spaces are provided for during the machine instal-
lation stages in order to limit these risks.
To preserve these conditions, the areas around the machine
must always be:
kept free of obstacles (e.g. ladders, tools, containers,
` `
boxes, etc.);
clean and dry;
` `
well lit.
` `
For the Customer's complete information, the residual risks
remaining on the machine are indicated below: such actions
are deemed improper and therefore strictly forbidden.
Residual risk Description of hazardous situation
The operator can slip due to water or
Slipping or falling
dirt on the oor
Burns/abrasions
Th e o p e r a to r d e l i b e r a te l y o r
(e.g. heating ele-
unintentionally touches some
ments, cold pan,
components inside the machine
cooling circuit
without using protective gloves
plates and pipes)
Contact with live parts during
Electrocution maintenance operations carried out
with the electrical panel powered
The operator intervenes on the machine
using unsuitable systems to access
Falling from above
the upper part (e.g. rung ladders, or
climbs on it)
The specialised technician may not
Crushing correctly x the control panel when
or injury accessing the technical compartment.
The panel could close suddenly.
When handling the machine or the
packing containing it, using unsuitable
Tipping of loads
lifting systems or accessories or with the
load unbalanced
Chemical Inhalation of refrigerant gas. Therefore
(refrigerant gas) always refer to the appliance labels