Audi A6 Repair Manual page 8

Audi A6 2005 ➤
Fuel Injection and Ignition - Edition 03.2008
Display on -VAS 5051- :
1 - Selection of diagnostic functions
– In selection -1-, press diagnostic function "04- Basic Setting".
Display on -VAS 5051- :
– Select "140" in button field -2- for "display group 140" and con‐
firm input by pressing
Display on -VAS 5051- :
Example:
1 - 42%
2 - 39.76 bar
3 - 40.63 bar
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
4 - Inactive
– Activate basic setting by pressing button
Display on -VAS 5051- :
Example:
1 - 0%
2 - 0 bar
3 - 5.46 bar
4 - Lower
The fuel rail will continue to be filled with fuel, but it will no longer
be under high pressure.
Now components or lines can be opened. A clean rag must be
placed around connection points. Escaping fuel must be absor‐
bed.
– In operating mode "Guided Fault-Finding", generate readiness
code for Engine Control Module (ECM) ⇒ Vehicle diagnosis,
testing and information system VAS 5051.
4
Rep. Gr.24 - Fuel injection system
button.
Q
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
A
.