Audi A6 Repair Manual page 34

Audi A6 2005 ➤
Fuel Injection and Ignition - Edition 03.2008
– Remove front engine cover -arrows-.
– Remove rear engine cover -arrows-.
– Disconnect check valve -1- from air duct hose.
– Remove air duct hose, thereby loosening hose clamp -2- and
opening clips -arrows-.
– Disconnect electrical harness connectors.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
1 - Change over valve for intake manifold flap -N239-
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
2 - Intake Manifold Tuning (IMT) valve position sensor -G513-
– Remove vacuum lines -arrow A- and -arrow B-.
30
Rep. Gr.24 - Fuel injection system