Removing And Installing The M.2 Ssd Module - Clevo P650HS Service Manual

Removing and Installing the M.2 SSD Module

M.2 SSD-1 Removal Procedure
1. Turn off the computer, turn it over, remove the battery
2. The M.2 SSD module will be visible at point
3. Remove the screw (Figure
2
4. The M.2 SSD module (Figure
3
5. Reverse the process to install a new module (do not forget to replace the screws and thermal pad).
a.
1
b.
2
(page 2 -
on the mainboard
1
9b)
9c) will pop-up, and you can remove it from the computer.
c.
6).
(Figure 9a).
3
Removing and Installing the M.2 SSD Module 2 - 13
Disassembly
Figure 9
M.2 SSD-1 Module
Removal
a. Locate the M.2 SSD.
b. Remove the screw.
c. The M.2 SSD module
will pop up.
3

3.M2 SSD Module
• 1 Screw