Print Format Menu - Rice Lake 880 Technical And Service Manual

COM Menu
Parameter Choices
STOP B 1
2
PRNMSG OFF
ON
SFMT format

3.2.10 Print Format Menu

....
....
PFORMT
PFORMAT Menu
Parameter Choices
GFMT
FMT
PORT
NFMT
FMT
PORT
ACCFMT
FMT
PORT
SPFMT
FMT
PORT
HDRFMT
Stop Bits – selects the number of stop bits transmitted and the number of stop bits
expected to be received by the port
Print message – display a message when a print is transmitted on this port.
Stream format – specifies the stream format used for streaming output of scale data
(TRIGGE=STRLFT or STRIND) or specifies the expected input for a serial scale
(TRIGGE=REMOTE).
Table 3-11. COM Menu Parameters (Continued)
....
SETUP
....
GFMT NFMT
format
Figure 3-15. Print Format Menu Structure
Alphanumeric, Max Length: 1000
Normal mode, no tare in system
GROSS<G><NL2><TD><NL>
The communications port the the print data will be sent to: COM, USBCOM, OFF.
Alphanumeric, Max Length: 1000
Normal mode, tare in system.
GROSS<G><NL>TARE<SP><T><NL>NET<SP2><N><NL2><TD><NL>
The communications port the the print data will be sent to: COM, USBCOM, OFF.
Alphanumeric, Max Length: 1000
Accumulator enabled and displayed, or setpoint print operation with PSHACC=ON.
ACCUM<A><NL><DA><TI><NL>
The communications port the the print data will be sent to: COM, USBCOM, OFF.
Alphanumeric, Max Length: 1000
Setpoint print operation with PSHPRNT=ON.
<SCV><SP><SPM><NL>
The communications port the the print data will be sent to: COM, USBCOM, OFF.
Must be inserted into other print format. Alphanumeric, maximum length 300.
COMPANY NAME<NL>STREET ADDRESS<NL>CITY, ST ZIP<NL2>
Table 3-12. Print Format Menu Parameters
Description
ACCFMT SPFMT
FMT PORT
COM
USBCOM
OFF
Description
HDRFMT
format
Configuration 41