6.
Press the key you want to change and specify an erase width with [ ] and [ ].
Pressing [ ] or [ ] changes the width in increments of 1 mm (0.1 inches). Pressing and holding
down the relevant key changes the width in increments of 10 mm (1 inch).
To specify another erase width, repeat step 6.
7.
Press [OK] twice.
• To change the value you entered, press [ ] and [ ], and then specify a new value.
Image Repeat
The original image is copied repeatedly.
The number of repeated images depends on the original size, paper size, and reproduction ratio. For
example, see the following table:
BZH131
Advanced Copier Functions
151
3