4.
Select the desired message.
You can change the position, size, and density of the stamp.
5.
Press [All Pages] or [1st Page Only] to select the print page.
6.
After making all settings, press [OK].
7.
Press [OK].
• You can change the settings for Preset Stamp under Stamp in User Tools. Depending on the setting,
density may change. For details about Stamp, see "Stamp".
• Depending on paper size, if you change the stamp size, parts of the stamp might not be printed.
• p.212 "Stamp"
Changing the stamp position, size, and density
Changes the stamp position, size, and density.
1.
Press [Change] under Position / Size / Density.
2.
Select the stamp position, size, and density, and then press [OK].
Stamps
3
127