Table of Contents
Advertisement
2.
Press [Copier / Document Server Features].
3.
Press [Stamp].
4.
Press [User Stamp].
5.
Press [Program / Delete Stamp].
6.
Press [Program], and then press the stamp number you want to program.
7.
Enter the user stamp name (up to 10 characters) with the letter keys, and then press [OK].
8.
Enter the horizontal size of the stamp with the number keys, and then press [ ].
9.
Enter the vertical size of the stamp with the number keys, and then press [ ].
10.
Place the original for user stamp on the exposure glass, and then press [Start Scanning].
The original will be scanned, and the stamp will be registered.
11.
Press [Exit].
12.
Press [Exit].
The display returns to the User Tools / Counter / Enquiry screen.
13.
Press [Exit].
Exits settings and gets ready to copy.
• Stamp numbers with
are marked with "Not Programmed".
• If the stamp number is already being used, the machine will ask you if you want to overwrite it.
Press [Yes] or [Stop].
• You cannot restore the overwritten stamp.
• Originals cannot be scanned from the ADF when programming the user stamp.
• For details about how to enter text, see "Entering Text", About This Machine.
Deleting the user stamp
Deletes an image registered as a user stamp.
already have settings in them. Stamp numbers that are not registered yet
Stamps
3
131
Hide quick links:
Advertisement
Table of Contents
