Memory Function - Miele Allerwash W 2584 WPS Operating Instructions Manual

Programmable functions

Memory function

If an additional option is selected for
a programme, and / or the spin
speed is altered, the machine stores
these changes in memory at the start
of a programme.
When that particular programme is
chosen again, the display will show the
additional options and / or spin speed
which have been stored for that
programme in the memory.
The washing machine is delivered with
the memory function deactivated.
Follow steps A to G to programme
and store in memory.
Before you begin, first ensure that:
– The washing machine is switched off.
– The drum door is closed.
– The programme selector is at Finish .
68
A Press the additional option buttons
Intensive and Rinse plus at the same
time, hold pressed in and . . .
B . . . switch the machine on with the
I-On/0-Off button.
C Let go of all these buttons. P 0
appears in the display.
D Turn the programme selector to
Pillows hygiene 95°C :
E The P will now flash in the display
alternating with the number 11.
In addition, one of the following will
appear on the right of the display:
0 = the memory function is
deactivated.
or:
1 = the memory function is activated.
F Press the Start button to change the
display from 0 to 1 or from 1 to 0.
G Switch the washing machine off with
the I-On/0-Off button.
The setting you have selected is now
stored in memory and will remain so
until you alter it.