Adding Or Removing Laundry After A Programme Has Started - Miele Allerwash W 2584 WPS Operating Instructions Manual

Garment care label symbols
Adding or removing laundry
after a programme has started
Laundry can be added or removed
after the programme has started when
using the following programmes:
– Hygiene +
– Cottons Universal
– Minimum iron
– First wash
– Quick wash
^ Press the Door button in until the
drum door springs open.
^ Add or remove items.
^ Close the door.
The programme will continue
automatically.
Please note:
Once a programme has started the
machine cannot recognise any
adjustment to the load.
For this reason, if laundry is added or
removed after the start of a programme,
the machine will always complete the
programme cycle for a full load.
This can alter the programme time left
shown in the display.
28
The door cannot be opened, if:
– the suds temperature is above 55°C.
– the water is above a certain level.
– programme locking is switched on.
– the programme has reached the
Final spin stage.
The Locked check light will come on if
the Door button is pressed when the
above conditions are present.