Table of Contents
Advertisement
Memory function
If an additional option is selected for
a programme, and / or the spin op-
tion is altered, the machine stores
these changes in memory at the start
of a programme.
The memory function is active when the
machine is first delivered but can be
programmed to be switched off.
Deactivating
First select programming mode.
Selecting programming mode
1
The machine must be switched off
and the drum door closed. The pro-
gramme selector must point to "Fin-
ish".
2
Press the additional option buttons
"Short" and "Water plus" at the same
time and hold pressed in and:
3
. . . switch the machine on with the
"I-ON/0-OFF"-button.
4
Let go of all these buttons.
The indicator light "Main wash" flashes
in the sequence display.
Deactivating the programmable func-
tion
To de-select the "Memory" programm-
able function turn the programme selec-
tor to
DELICATES 30°C ***.
Programmable functions
As this programmable function is active
when the machine is first delivered, the
"Rinses" indicator light will come on in
the sequence display as soon as the
programme selector is turned to DELI-
CATES 30°C.
To deactivate the "Memory" function
press the START button and the light
will go out. The memory function is now
deactivated.
Storing in memory
To store this setting in memory
SWITCH the machine OFF with the I-
On/0-OFF" button.
Reactivating
To reactivate the memory function re-
peat the procedure given above from
1
point
as far as the *** shown above.
Pressing the "START" button again will
reactivate the "Memory" function and
the "Rinses" indicator light will come on
again. The function is now reactivated.
Store in memory by pressing the I-On/0-
Off button.
37
Hide quick links:
Advertisement
Table of Contents
