Memory Function - Miele W 502 Operating Instructions Manual

If an additional option(s) is selected
for a programme, and / or the spin
speed is altered, the machine stores
these changes in memory at the start
of a programme.
When that particular programme is
chosen again, the display will show the
additional option(s) and / or spin speed
which have been stored for that
programme in the memory.
The washing machine is delivered with
the memory function de-activated.
A
The programmable functions are
activated to call up further features not
shown on the control panel by using the
additional option buttons in
combination with the programme
selector.
Before you begin, first ensure that:
– The washing machine is switched off.
– The drum door is closed.
– The programme selector is at Finish .
60
G
A Press the Start button and keep it
pressed in whilst carrying out steps
B to C.
B Switch the machine on with the
I-On/0-Off button.
C Wait until the Start indicator light
comes on . . .
D . . . and then release the Start
button.
E Turn the programme selector to the
Cottons 30°C position:
If the Soak/Pre-wash sequence
indicator light:
= the Memory function
F Press the Start button to activate or
deactivate the Memory function
option.
G Switch the washing machine off with
the I-On/0-Off button.
The setting you have selected is now
stored in memory and will remain so
until you alter it.
= the Memory
function
.
.