Top-Up Rinse For Hygiene + 95°C And Pillows Hygiene 95°C - Miele Allerwash W 2584 WPS Operating Instructions Manual

Top-up rinse for Hygiene +
95°C and Pillows hygiene 95°C
When this is activated, additional
water flows into the drum at the end
of the main wash to cool the suds
down. Hot suds can damage plastic
drainage pipes.
Top-up rinse should be activated:
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
– where the drainage pipes do not
comply with DIN 1986.
The washing machine is delivered with
the Top-up rinse deactivated.
Follow steps A to G to programme
and store in memory.
Before you begin, first ensure that:
– The washing machine is switched off.
– The drum door is closed.
– The programme selector is at Finish .
Programmable functions
A Press the additional option buttons
Intensive and Rinse plus at the same
time, hold pressed in and . . .
B . . . switch the machine on with the
I-On/0-Off button.
C Let go of all these buttons. P 0
appears in the display.
D Turn the programme selector to
Pillows hygiene 60°C :
E The P will now flash in the display
alternating with the number 10.
In addition, one of the following will
appear on the right of the display:
0 = Top-up rinse is deactivated
or:
1 = Top-up rinse is activated
F Press the Start button to change the
display from 0 to 1 or from 1 to 0.
G Switch the washing machine off with
the I-On/0-Off button.
The setting you have selected is now
stored in memory and will remain so
until you alter it.
67