Inspection Procedure - GE F60 Instruction Manual

1.1 IMPORTANT PROCEDURES
1
1. Open the relay packaging and inspect the unit for physical damage.
2. View the rear nameplate and verify that the correct model has been ordered and delivered.
3. Ensure that the following items are included:
• Instruction manual (if ordered)
• GE EnerVista™ CD (includes the EnerVista UR Setup software and manuals in PDF format)
• Mounting screws
4. If there is any noticeable physical damage, or any of the contents listed are missing, please contact GE Digital Energy
immediately as follows.
GE DIGITAL ENERGY CONTACT INFORMATION AND CALL CENTER FOR PRODUCT SUPPORT:
GE Digital Energy
650 Markland Street
Markham, Ontario
Canada L6C 0M1
TELEPHONE:
FAX:
E-MAIL:
HOME PAGE:
For updates to the instruction manual, firmware, and software, visit the GE Digital Energy website.
1-2
Figure 1–1: REAR NAMEPLATE (EXAMPLE)
Worldwide +1 905 927 7070
Europe/Middle East/Africa +34 94 485 88 54
North America toll-free 1 800 547 8629
+1 905 927 5098
Worldwide multilin.tech@ge.com
Europe multilin.tech.euro@ge.com
http://www.gedigitalenergy.com/multilin
F60 Feeder Protection System
1 GETTING STARTED

1.1.2 INSPECTION PROCEDURE

GE Multilin