Advertisement
6200 Series
Art. 6286
3.5" colour display videophone
SIGNALS ON CONNECTION TERMINALS
BUS1
Bus input
BUS2
Bus input
GND
Ground
+12VM
+12Vdc power supply input for version with memory board option
GND
Ground
+VAUX
Auxiliary power supply input (to be used when the switch 4 of SW3 is set to ON)
C
Dry contact Max 50Vdc @ 100mA. Internally linked to NO when the
NO
Dry contact Max 50Vdc @ 100mA. Internally linked to C when the
–DOL
Auxiliary LED power supply input (ground)
+DOL
Auxiliary LED power supply input (+12Vdc)
AL-LB_GND
Ground output for use in combination with "AL" & "LB" active low inputs
LB
Local bell input (active low)
AL
Alarm input (not implemented yet)
SPECIFICATION
Housing/Mounting:
Push buttons:
Programming:
Controls:
Power Supply:
Power consumption:
Working Temperature:
MANUFACTURER
VIDEX ELECTRONICS S.P.A.
Via del Lavoro, 1 - 63846 Monte Giberto (FM) Italy
Tel (+39) 0734 631669 - Fax (+39) 0734 632475
www.videx.it - info@videx.it
The product is CE marked demonstrating its conformity and is for distribution
within all member states of the EU with no restrictions. This product follows
the provisions of the European Directives 2014/30/EU (EMC); 2014/35/EU
(LVD); 2011/65/EU (RoHS): CE marking 93/68/EEC.
Art. 6286 - Installation instructions
6200 Series Videophones / surface mount
Yes, 4
Yes, carried out by the buttons and the dip-switches located on the rear of the videophone
Call tone volume, brightness and hue
Supplied by the BUS line
Stand-by: 0.2mA
Operating: 200mA
-10 +50 °C
button is pressed. Max 35Vdc, 10mA
button is pressed. Max 35Vdc, 10mA
CUSTOMER SUPPORT
All Countries:
VIDEX ELECTRONICS S.P.A.
www.videx.it - technical@videx.it
Tel: +39 0734-631669 - Fax: +39 0734-632475
UK Customers:
VIDEX SECURITY LTD
www.videx-security.com
Tech Line: 0191 224 3174 - Fax: 0191 224 1559
4
66251130-EN - V1.4 - 30/06/16
Advertisement
