Mercedes-Benz AMG GT Operator's Manual page 273

An arrow on the sidewall of the tire indicates its
correct direction of rotation.
Storin heels
Store wheels that are not being used in a cool,
dry and preferably dark place. Protect the tires
from oil, grease, gasoline and diesel.
ountin a heel
Pre arin the vehicle
Stop the vehicle on solid, non-slippery and
X
level ground.
Apply the electric parking brake manually.
X
Bring the front wheels into the straight-ahead
X
position.
Shift the transmission to position j.
X
Switch off the engine.
X
With E ESS G start function or vehi
X
cles ith E ESS G
door.
The vehicle electronics are now in key posi-
tion u. This is the same as the Smart ey
having been removed.
or
Remove the Smart ey from the ignition lock.
X
If included in the vehicle equipment, remove
X
the tire-change tool kit from the vehicle.
Safeguard the vehicle against rolling away.
X
Securin the vehicle to revent it from
rollin a ay
If your vehicle is equipped with a wheel chock, it
can be found in the tire-change tool kit
( page 23 ).
Y
open the driver's
han in a heel
The folding wheel chock is an additional safety
measure to prevent the vehicle from rolling
away, for example when changing a wheel.
Fold both plates up :.
X
Fold out lower plate ;.
X
Guide the lugs on the lower plate fully into the
X
openings in base plate =.
Place chocks or other suitable items under
X
the front and rear of the wheel that is diago-
nally opposite the wheel you wish to change.
Raisin the vehicle
G
WARNING
If you do not position the ack correctly at the
appropriate acking point of the vehicle, the
ack could tip over with the vehicle raised.
There is a risk of in ury.
Only position the ack at the appropriate ack-
ing point of the vehicle. The base of the ack
must be positioned vertically, directly under
the acking point of the vehicle.
!
Only position the ack at the appropriate
acking point of the vehicle. Otherwise, you
could damage the vehicle.
bserve the follo in
cle
To raise the vehicle, only use the vehicle-spe-
R
cific ack that has been tested and approved
by Mercedes-Benz. If used incorrectly, the
ack could tip over with the vehicle raised.
The ack is designed only to raise and hold the
R
vehicle for a short time while a wheel is being
changed. It must not be used for performing
maintenance work under the vehicle.
Avoid changing the wheel on uphill and down-
R
hill slopes.
hen raisin the vehi