Mercedes-Benz AMG GT Operator's Manual page 111

A G SPEE S I
vervie of transmission ositions
j Park position with parking lock
Reverse gear
k
Neutral
i
Drive
h
En a in ar osition P
When the vehicle is stationary, depress the
X
brake pedal.
Press button :.
X
Shifting directly from j to k:
Start the engine ( page 103).
X
Y
Depress the brake pedal and push the E-
X
SELECT lever forwards past the first point of
resistance.
Shifting directly from j to h:
Start the engine ( page 103).
X
Y
Depress the brake pedal and push the E-
X
SELECT lever backwards past the first point of
resistance.
To release park position j:
depress the brake pedal and
R
push the E-SELECT lever forwards or back to
R
the first point of resistance
s eed s orts transmission
The transmission shifts to neutral i.
En a in ar osition P automatically
Park position j is engaged automatically in the
following circumstances:
if you switch off the engine using the Start/
R
Stop button and open the driver's or front-
passenger door.
if you remove the Smart ey from the ignition
R
lock.
if you open the driver's door while traveling at
R
low speeds in transmission position h or k.
Under certain conditions, the automatic trans-
mission shifts automatically to transmission
position j if the HOLD function or Distance
Pilot DISTRONIC is activated. Observe the infor-
mation on the HOLD function (
Distance Pilot DISTRONIC (
En a in reverse ear R
Start the engine ( page 103).
X
Y
When the vehicle is stationary, depress the
X
brake pedal.
Push the E-SELECT lever forwards past the
X
first point of resistance.
Shiftin to neutral N
Start the engine ( page 103).
X
Y
When the vehicle is stationary, depress the
X
brake pedal.
Push the E-SELECT lever forwards or back to
X
the first point of resistance.
If you move the E-SELECT lever to i before
switching off the engine, the transmission
remains in i for approximately 30 minutes. If
you open the driver's or front-passenger door
during this time, the transmission shifts auto-
matically to j.
The transmission remains in i if:
the Smart ey is in the ignition lock and
R
you use the E‑SELECT lever to shift the trans-
R
mission to i before switching the engine off
This still applies if you open the driver's or front-
passenger door.
You can find further information under Car
wash ( page 233).
Y
page 136) and
Y
page 131).
Y