Mercedes-Benz AMG GT Operator's Manual page 221

The vehicle can be immediately remotely locked
within four days of the ignition being turned off.
After this time, remote closing may be delayed
by 1 to 60 minutes. After 30 days the vehicle
can no longer be locked remotely.
The vehicle remote closing feature is available if
the relevant mobile phone network is available
and a data connection is possible.
Contact the following service hotlines:
X
Mercedes-Benz Customer Assistance Center
at 1-800-FOR-MERCedes (1-800-367-6372)
or 1-866- 0- 007
You will be asked for your password.
The next time you are inside the vehicle and you
switch on the ignition, the
ly message appears in the multifunction
display.
Alternatively, the vehicle can be locked via:
the Internet, under the Owners Online sec-
R
tion
telephone applications (e.g. for iPhone
R
Android™)
To do this, you will need your identification num-
ber and password.
Stolen vehicle recovery service
If your vehicle has been stolen:
Notify the police.
X
The police will issue a numbered incident
report.
Forward this number to the Mercedes-Benz
X
Customer Assistance Center along with your
PIN.
The Mercedes-Benz Customer Assistance
Center then tries to locate the system. The
Mercedes-Benz Customer Assistance Center
contacts you and the local law enforcement
agency if the vehicle is located.
However, only the law enforcement agency is
informed of the location of the vehicle.
If the anti-theft alarm system is activated for
longer than 30 seconds, mbrace automatically
notifies the Mercedes-Benz Customer Assis-
tance Center.
Vehicle ealth hec
With the ehicle Health Check, the Customer
Assistance Center can provide improved sup-
port for problems with your vehicle. During an
D s
®
,
existing call, vehicle data is transferred to the
Customer Assistance Center.
The customer service representative can use
the received data to decide what kind of assis-
tance is required. You are then, for example,
guided to the nearest Mercedes-Benz Service
Center or a recovery vehicle is called.
If vehicle data need to be transferred during an
Info call or a Roadside Assistance call, this is
initiated by the Customer Assistance Center.
The a si ssis a
sage appears in the display. If the ehicle Health
Check can be started, the
l Dia s i s
l ia s i s message appears in the
display.
Press the s button to confirm the message.
X
If the i l Dia
X
a i i message appears: turn the
Smart ey to key position 2 in the ignition
lock ( page 102).
Y
If the l as ll
X
i y p
l a sa p si i
appears: please follow the instructions
received by phone and move your vehicle to a
safe position.
The message in the display disappears.
The vehicle operating state check begins.
During this procedure, you will see the
l Dia s i s
If you select a l, the ehicle Health
Check is canceled completely.
When the check is complete, the
i l ia s i s a a
i ay i
a a a s message appears. The vehicle
data can now be sent.
Press the button to confirm the message.
X
The voice connection with the Customer
Assistance Center is terminated.
The i l Dia
i Da a message appears.
The vehicle data is sent to the Customer
Assistance Center.
Depending on what the customer service rep-
resentative agreed with you, the voice connec-
tion is re-established after the transfer is com-
plete. If necessary, you will be contacted at a
later time by another means, e.g. by e-mail or
phone.
eatures
mes-
s i‐
i a i‐
s i s l as
i s i s
a y i‐
message
i‐
i message.
i
i ‐
p i
s i s a s ‐