Using The Remote Jack; Using A Footswitch (Tascam Rc-3F); Setting Up The Footswitch; Using The Footswitch - Tascam SD-20M Owner's Manual

8 – Using the REMOTE jack
This unit has a REMOTE jack. Connect a TASCAM RC-3F
footswitch or TASCAM RC-10 wired remote control (both sold
separately) here to enable remote operation of this unit.

Using a footswitch (TASCAM RC-3F)

TASCAM RC-3F (sold separately)

Setting up the footswitch

1. Select the item on the
REMOTE
MULTI JOG dial. (See "Menu operation procedures" on page
14.)
The screen appears.
REMOTE
2. Set the item to RC-3F (default).
CONTROLLER
3. Select the item and set the footswitch mode.
MODE
Options: (default),
PLAY RECORD1
MODE
L
m
PLAY
8
RECORD1
8
RECORD2
MINUTES
: mark function
MARK
: Jumpback playback
: Variable speed function on/off
SPEED
(All functions are the same as the main unit.)
4. When finished, press the STOP/HOME [8] button to return
to the Home Screen.

Using the footswitch

Press the pedals of the footswitch to use the operations
assigned to them on the
REMOTE
36
TASCAM SD-20M
screen, and press the
MENU
, ,
RECORD2 MINUTES
Footswitch
C R
7/8 ,
0/9 ,
0/9
MARK
7/8 SPEED
screen.
Using a remote control (TASCAM
RC-10)
TASCAM RC-10 (sold separately)

Setting up a wired remote control

1. Select the item on the
REMOTE
MULTI JOG dial. (See "Menu operation procedures" on page
14.)
The screen appears.
REMOTE
2. Set the item to RC-10 (default: RC-3F).
CONTROLLER
Function button details
Function buttons
F1 F2
REPEAT SPEED*
*Speed change (variable speed function on/off
3. When finished, press the STOP/HOME [8] button to return
to the Home Screen.

Using the wired remote control

Press the function (F1–F4) buttons on the wired remote control
to use the operations assigned to them on the
screen, and press the
MENU
F3 F4
SPEED+ SPEED−
screen.
REMOTE