Checking The Configuration; Maintaining Traffic Policing And Traffic Shaping; Displaying The Traffic Statistics - Huawei Quidway S7700 Configuration Manual - Qos

Quidway S7700 Smart Routing Switch
Configuration Guide - QoS
By default, the rate for traffic shaping in an interface queue is the maximum bandwidth of the
interface.
----End

2.4.5 Checking the Configuration

After traffic shaping is configured, you can view the rate limit on an interface or in an interface
queue.
Procedure
l
l
----End

2.5 Maintaining Traffic Policing and Traffic Shaping

This section describes how to maintain traffic policing and traffic shaping.

2.5.1 Displaying the Traffic Statistics

If the traffic statistics action is configured, you can run display commands to view the traffic
statistics.
Context
To view the flow-based traffic statistics, a traffic policy must exist and contain the traffic
statistics action.
Procedure
l
l
l
Issue 01 (2011-07-15)
NOTE
The PIR and PBS values cannot be set on W series boards.
Run the display qos queue statistics interface interface-type interface-number command
to check the rate limit of the interface queue.
NOTE
S-series and W-series boards do not support the display qos queue statistics command. For details
about S-series and W-series boards, see Board Classification in the Quidway S7700 Smart Routing
Switch Hardware Description.
Run the display qos configuration interface [ interface-type interface-number ] command
to check all the QoS configurations on the interface.
Run the display traffic policy statistics { global [ slot slot-id ] | interface interface-type
interface-number | vlan vlan-id } { inbound | outbound } [ verbose { classifier-base |
rule-base } [ class classifier-name ] ] command to check the flow-based traffic statistics.
Run the display qos car statistics interface interface-type interface-number inbound
command to check the statistics on forwarded and discarded packets on a specified interface
configured with interface-based traffic policing.
Run the display qos queue statistics interface interface-type interface-number command
to check the queue-based traffic statistics on the interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Traffic Policing and Traffic Shaping Configuration
62