Traffic Policing And Traffic Shaping Configuration - Huawei Quidway S7700 Configuration Manual - Qos

Quidway S7700 Smart Routing Switch
Configuration Guide - QoS
2
About This Chapter
This document describes basic concepts of traffic policing and traffic shaping, and introduces
the configuration method of QoS CAR, the configuration method of traffic policing based on a
traffic classifier, and traffic shaping, and provides configuration examples.
2.1 Overview of Traffic Policing and Traffic Shaping
This section describes the basic concepts of traffic policing and traffic shaping and the
differences between traffic policing and traffic shaping.
2.2 Configuring Interface-based Traffic Policing
After interface-based traffic policing is configured, the S7700 performs traffic policing on all
service traffic on the interface.
2.3 Configuring Traffic Policing Based on a Traffic Classifier
After traffic policing based on a traffic classifier is configured, the S7700 policies the traffic
matching traffic classification rules.
2.4 Configuring Traffic Shaping
After traffic shaping is configured, the S7700 shapes packets matching traffic classification rules
so that packets are sent out at an even rate.
2.5 Maintaining Traffic Policing and Traffic Shaping
This section describes how to maintain traffic policing and traffic shaping.
2.6 Configuration Examples
This section provides several configuration examples of traffic policing and traffic shaping.
Issue 01 (2011-07-15)
Traffic Policing and Traffic Shaping
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.

2 Traffic Policing and Traffic Shaping Configuration

Configuration
46