Advertisement
2. WIRING
Breaker settings
The front panel of the power supply unit houses the breakers. Remove the protective
sheet covering the lid, then open the panel to adjust the breaker settings.
230V
For 100/110/115V input set the double breaker on the right to ON.
For 220/230V input, set the single breaker on the left to ON.
2-14
ON
220V
0V
115V
110V
OFF
WARNING
Only set one breaker to ON position at
any time.
Setting both breakers to ON can result in
high voltage in the unused terminal block.
Turn the unused breaker OFF always.
Voltage breakers
100V
0V
Voltage indicators
Hide quick links:
Advertisement
