Collecting Configuration Information; Configuration Information - HP ML110 G1 User Manual

Collecting configuration information
Choose a host name and collect general information required to initialize
the storage server for either dynamic host configuration protocols
(DHCP) or non-DHCP configurations. This information is needed during
configuration, as shown in
before attempting to configure the storage server.
Table 5 Configuration Information
Part A: To be completed for DHCP and non-DHCP configurations
Server Host Name:
Part B: To be completed for non-DHCP configurations only
DNS Servers
Storage Server NIC
Port*
NIC 1
NIC 2
* Disable ports that will not be used. Each Ethernet port, whether standard
or added, must be configured with a separate subnet.
Part C: SNMP Information (optional)
Trap Destination (IP
Address) Manager
Client:
Management Traps
Community String:
System Management
Community String:
22
System Configuration
Table
IP Address
1
2
3
IP Address
5. Become familiar with this information
Subnet Gateway
Mask Address