Completing Basic Setup; Completing The System Configuration - HP ML110 G1 User Manual

Completing basic setup

This completes the basic configuration of the HP ProLiant Storage Server,
however, some computing environments can require additional settings
and configuration as noted below.
Completing the system configuration
Most of these tasks can be completed using the WebUI. All procedures
for the configuration tasks can be found in the HP ProLiant Storage Server
Administration Guide.
• Place the storage server into an Active Directory or Windows NT®
4.0 domain for ease of manageability (highly recommended).
• Enable protocols such as NFS sharing, NCP, and/or AppleTalk.
• Create shares corresponding to the protocols mentioned in the
previous steps.
• Configure shadow copies for creating point-in-time snapshots of
data volumes.
• Configure data replication software via Microsoft File Replication
Services.
• Enable and establish space usage quotas.
• Configure DFS (Distributed File System) or publish the storage
server shares into an already existing DFS structure.
• Adjust logging for system, application, and security events.
• Install additional third-party software, such as backup, anti-virus,
or monitoring agents.
NOTE:
HP StorageWorks Library and Tape Tools installer software is
located on the storage server in the c:\hpnas\components\
tapetools folder. For more information about this product, go to:
http://www.hp.com/support/tapetools.
HP ProLiant Storage Server user guide
29