Disk Management, Partitioning (Ml110 G2 Workgroup) - HP ML110 G1 User Manual

1. CD-RW/DVD-ROM
2. HDD 0, 1
NOTE:
This is logical drive 1 as presented by the SATA RAID controller.
3. PXE (network boot)
Figure 12 Disk management, partitioning (ML110 G2
Workgroup)
Under normal circumstances, the ML110 G2 (Workgroup) storage server
boots up from the OS logical drive. If the system experiences a drive
failure, the Adaptec 2410SA sounds an audible alert to inform the user of
a drive failure.
• If a single drive failure occurs, it is transparent to the OS.
• If a second drive fails, the data volume is lost and must be restored
from backup.
When the primary OS has a failure such as system files becoming
corrupted, registry corrupted, and the system hangs during boot, the system
should be restored to the factory default state using the Quick Restore DVD.
The user should backup their user data and then use the Quick Restore DVD
to restore the system to the factory default state as soon as conveniently
possible.
52 Server Storage