Configuring The Terminal; Entering And Leaving Setup Mode - Wyse WY-60 User Manual

ENTERING AND LEAVING
SETUP MODE
Top Setup Level
Configuring the Terminal
This chapter tells how to configure the terminal's operating
parameters and redefine the programmable keys in setup mode.
To enter setup mode, press
I
Shift
I
and
I
Setup
I
simultaneously
( I
Setup
I, I
Shift
I I
Sys Reg
I, I
Shift
I I
Select
I).
Data on the
screen disappears, and the top setup level screen appears; the
data is restored when the terminal returns to normal operating
mode.
Caution Don't enter setup mode while data is being transmitted.
The terminal can't receive data from the computer in setup
mode.
The top level serves as a directory to the other setup levels and
to the alternatives for leaving setup mode.
~
I
SAVE MODES
II
SAVE ALL
II
DEFAULT ALL
II
RESTORE ALL
I
I
TO EXIT SETUP USE ARROWS AND F10
II
TO CHANGE PARAMETERS USE F1-F9
I
• The fields at the bottom of the screen name the various setup
levels where you can change the terminal's operating parameters.
• The fields at the top of the screen show the options for saving
or not saving changes in nonvolatile memory when you return
the terminal to the normal operating mode.
• The second line identifies the keys that you press to select the
fields and activate their functions.