Printing - Wyse WY-60 User Manual

Operating the Terminal 3-3
Figure 3-3 Data Transmission
in the Communication Modes
Full Duplex
Screen
PRINTING
Keyboard
Half Duplex
Keyboard
Block or
Half-Duplex Block
•
L _ _ _ ~_~
Host
Host
Keyboard Host
~~~~~j----t~DNi:sP~I~ay Pro~c:e:s:so~r~--~L-~~~~
The terminal is set up to communicate with a serial printer
through the A UX port. If you choose to connect the printer to
the MODEM port instead, reverse the functions of the ports by
changing the Data/Printer parameter in setup mode. (Appendix A
gives the connector pin assignments for both ports.)
To print data coming from the computer,
• Make sure the printer port is configured for transmit
handshaking that matches the requirements of your printer.
• Press
I
Ctrl
I I
Print
I
(I
Print Line
I, I
Shift
I I
Sys Reg
I)
to turn on
auxiliary print mode.
To print a page of data when you have a serial printer connected
directly to the terminal,
• Press
I
Shift
I I
Break
I (I
Block
I)
to put the terminal in block
mode.